Study and Analysis of the Operation of a Cuk Converter for Precise Voltage Regulation

Merabet Hichem, Bahi Tahar, Boukadoum Aziz, Drici Djalel

Abstract


This paper  focuses on the application of a Cuk converter for voltage regulation in electronic devices. The Cuk converter is a DC-DC voltage converter that uses a unique topology to regulate the  output voltage from a DC input voltage source. In this study, we examine the operation of the Cuk converter, model its behavior, analyze its performance, and optimize its design for various applications.

The Cuk converter has several advantages, including galvanic isolation, reduced switching losses, and the ability to use low voltage rating components. These advantages make it an ideal choice for powering electronic devices that require precise voltage regulation, such as sensor power supplies, control electronics, and wireless communication systems.

   Analyzing its performance Analyzing the converter's performance also involves examining its efficiency, output voltage regulation, and stability under varying load conditions.

Simulation results with MATLAB/Simulink provide evidence of the performance of the converter’s control in photovoltaic systems applications; it is able to make the output voltage stable when rapid changes occur in the input parameters.


Keywords


Cuk converter; voltage regulation; Control; Stability; Simulation

Full Text:

PDF

References


Surbhi Shringi , Santosh Kumar Sharma , Utkarsh Gupta , Kuldeep Singh, “Comparative Study of Cuk, Zeta, Buck-Boost, Boost, Buck Converter in a Standalone PV System”,International Journal of Engineering Research & Technology (IJERT) http:// www.ijert.org Vol. 8 Issue 09, September-2019.

A. F. Algamluoli, “Novel Controller for DC-DC Cuk Converter, ”2019 1st Global Power, Energy and Communication Conference (GPECOM), Nevsehir, Turkey, 2019, pp. 117-121, doi: 10.1109/GPECOM.2019.8778545.

A. Singh, “CUK Converter Controller Design, Modelling and Tuning for Solar Battery Charger System,” 2021 IEEE International Power and Renewable Energy Conference (IPRECON), Kollam, India, 2021, pp. 1-7, doi: 10.1109/IPRECON52453.2021.9641038.

H.N. Shoumi, I. Sudiharto and E. Sunarno,, “Design of the CUK Converter with PI Controller for Battery Charging,” International Seminar on Application for Technology of Information and Communication (iSe-mantic), 2020.

A. Belkaid, I. Colak, K. Kayisli and R. Bayindir, “Design and Implementation of a Cuk Converter Controlled by a Direct Duty Cycle INC-MPPT in PV Battery System,” International Journal of Smart Grid, vol. 3, no. 1, 2019.

C. S. Tripathy, S. K. Dalai, T. Samal and R. Sahu, “Modeling and Simulation of Cuk-Converter Using Single Phase Matrix Converter Topology,” 2021 1st Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology(ODICON), Bhubaneswar, India, 2021, pp. 1-5, doi: 10.1109/ODICON50556.2021.9429018.

S. M. Ilman, A. Dahono, M. A. K. Prihambodo, B. A. Y. Putra, A. Rizqiawan and P. A. Dahono, “Analysis and Control of Modified DC-DC Cuk Converter,”2019 2nd International Conference on High Voltage Engineering and Power Systems (ICHVEPS), Denpasar, Indonesia, 2019, pp. 1-6, doi: 10.1109/ICHVEPS47643.2019.9011054.

ZeeshanRayeen, Sourav Bose and Prakash Dwivedi, “Study of Closed loop Cuk converter controlled by Loop Shaping Method,”International Conference on Industrial and Information Systems (ICIIS), pp. 442-446, 2018.

A. Siadatan, L. Ahmadi and A. Rezaei-Zare, “Analysis and Design of an Interleaved DC-DC Cuk Converter with High Efficiency,” 2022 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Sorrento, Italy, 2022, pp. 407-411, doi: 10.1109/SPEEDAM53979.2022.9841954.

B. T. Rao and D. De, “Additional Voltage Assisted High Gain DC-DC Cnverter with Modified ?uk Configuration,” 2020 IEEE International Conference on Power Electronics Smart Grid and Renewable Energy (PESGRE2020), pp. 1-6, 2020.

B. R. Ananthapadmanabha, R. Maurya and S. R. Arya, “Improved Power Quality Switched Inductor Cuk Converter for Battery Charging Applications,” in IEEE Transactions on Power Electronics, vol. 33, no. 11, pp. 9412-9423, Nov. 2018, doi: 10.1109/TPEL.2018.2797005.

B. B. Tuvar and M. H. Ayalani, “Analysis of a Modified Interleaved Non-Isolated Cuk Converter with wide range of load Variation and reduced Ripple content,”2019 3rd International Conference on Trends in Electronics and Informatics (ICOEI), pp. 406-411, 2019.

R. Leyva, “Optimal sizing of Cuk converters via Geometric Programming,” IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, Florence, Italy, 2016, pp. 2480-2485, doi: 10.1109/IECON.2016.7793443.

G. Gámez E, C. A. Palafox S., H. M. C., J. A. Beristáin J and J. P. R, “Contribution to the analysis and design of the Cuk converter for the transfer of photovoltaic solar energy to batteries,”2019 IEEE International Autumn Meeting on Power, Electronics and Computing (ROPEC), Ixtapa, Mexico, 2019, pp. 1-6, doi: 10.1109/ROPEC48299.2019.9057110.




DOI (PDF): https://doi.org/10.20508/ijsmartgrid.v7i3.300.g317

Refbacks

  • There are currently no refbacks.


www.ijsmartgrid.com; www.ijsmartgrid.org

iilhcol@gmail.com; ijsmartgrid@nisantasi.edu.tr

Online ISSN: 2602-439X

Publisher: ilhami COLAK (istanbul Nisantasi Univ)

Cited in Google Scholar and CrossRef